2 inch (50mm) Heavy Duty Yellow Oroflex 20 Rubber Layflat Hoses Fitted with Camlocks Fittings for Drill Rig Supply Lines
Applications:
Designed for heavy duty and agricultural discharge applications including dewatering, water transfer, slurry and manure spreading, irrigation, water and hydrocarbons bypass operations, compressed air applications up to 3” ID, high pressure liquid pumping, bulk powder discharge (excluding cement) and flotation booms.
Construction:
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked-in by a tough, highly resistant synthetic nitrile rubber & PVC blend, extruded through the weave and forming a single homogenous construction without the use of glues or adhesives.
Lining Properties:
a. Ultimate Tensile Strength of the lining: Minimum guaranteed value of 1,500 psi (10,500 kPa).
b. Ultimate Elongation: 400% minimum.
c. Accelerated Aging Test:
The tensile strength and ultimate elongation of the vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature f 70 degrees Celsius +/-1 degree (1580F +/- 180F) for a period of 96 hours, after which the properties of the rubber are at least 60% of the original values.
Abrasion Resistance:
The OROFLEX 20 hose will extend the lifetime of your application when under extreme conditions, where abrasion is the main concern. Abrasion resistance > 2000 cycles.
Service Temperature Range:
From -22ºF (-30ºC) to +176ºF (+80ºC). Special versions for higher and lower temperatures available upon request
Ozone Resistance:
No visible signs of cracking appear on the lining or cover when tested in accordance with ASTM D518 Procedure B, 100pphm/1040F (400C).
Chemical Resistance:
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils, and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.
Lengths:
Standard 50ft (15m), 66ft (20m), 100ft (30m), 200ft (60m), 330ft (100m). Special lengths up to 660ft (200m).
- Rubber Hose
- Composite Hose
- Hose Assemblies
- Ball Valves
- Gate Valves
- Claw Fittings
- Camlocks
- Bauer Hose Fittings
- Hose Restraints & Whip Checks
- Poly Pipe and Plasson Fittings
Click here to view our full range of Rubber, PVC & Composite Hoses.
Call us today in 1300 852 795 or email sales@fox-global.net
