News & Projects

Alfagomma 240AA FRAS Air Hose: Four Layers of Control for Western NSW Drilling

2-inch Alfagomma 240AA FRAS hose with Style S claw couplings, four-bolt clamps and restraint socks for western NSW drilling. Talk to Fox Global.

One hose assembly can contain several different engineering decisions.

The hose contains and carries the air. The coupling connects it to the next component. The clamp retains the hose on the fitting. The restraint sock helps limit uncontrolled movement if a connection separates.

Those functions belong together, but they are not interchangeable.

Fox Global is supplying 2-inch Alfagomma 240AA FRAS air and water delivery hose with 2-inch Style S claw couplings, four-bolt claw clamps and wire restraint hose socks to a drilling contractor at a western NSW mine site.

The package brings the hose, connection, retention and restraint requirements into the same conversation. For drilling contractors, maintenance managers and procurement teams, that is a more useful starting point than ordering rubber hose by diameter alone.

This article examines the assembly through four practical questions: what carries the pressure, what connects the line, what keeps the fitting attached, and what helps control the consequences of separation?

The supply brief: one application, four distinct components

The nominated hose is Alfagomma 240AA, a conductive rubber delivery hose with a stated working pressure of 20 bar, commonly catalogued as 300 psi.

Its specified applications include air, water and stone-dust delivery in underground coal mines. That product application should be distinguished from the confirmed project destination: a drilling contractor at a western NSW mine site. The destination alone does not identify the mine type or establish an underground installation.

The supplied package comprises:

ComponentFunction within the packageDetail to establish before use
2-inch Alfagomma 240AA hosePressure-containing delivery pathService conditions and current hose specification
2-inch Style S claw couplingsDemountable connection to compatible equipmentExact coupling model, rating and mating compatibility
Four-bolt claw clampsRetention of hose on the coupling tailApproved hose, fitting and clamp combination
Wire restraint hose socksSecondary restraint against uncontrolled movement after separationSize, rated application and anchorage arrangement

This separation of responsibilities matters. A restraint sock does not repair an inadequate termination. A clamp does not establish coupling compatibility. A high-rated hose does not increase the permitted pressure of a lower-rated fitting.

For a complete mining air-hose enquiry, call Fox Global on 1300 852 795 or email sales@foxglobal.com.au. Send the operating conditions and connection details so the package can be assessed as an assembly.

Layer one — the hose body must suit the actual service

Alfagomma 240AA is designed around mining delivery duties where mechanical exposure, fire performance and electrical properties matter alongside pressure containment.

Its construction combines a conductive rubber tube, textile reinforcement and a conductive protective cover.

The 240AA specification at a glance

PropertySpecified construction or performance
ProductAlfagomma 240AA
Size for this supply2-inch nominal, commonly listed as 51 mm internal diameter
Product descriptionAir and water delivery hose
Hose working pressure20 bar, catalogued as 300 psi
TubeBlack conductive SBR/NR
ReinforcementHigh tensile textile cords
CoverBlack conductive SBR
Cover resistanceAbrasion, ozone and fire resistant
Stated applicationAir, water and stone-dust delivery in underground coal mines
FRAS descriptionFire Resistant Anti-Static
Manufacturer standard statementExceeds AS 2660/B
Safety factor for the 2-inch size4:1, within the size range up to and including 63 mm
Specified temperature range-30°C to +80°C

Alfagomma’s published mining literature supports the 240AA construction, FRAS designation, pressure category and temperature range. Use current documentation for the actual supplied hose and confirm supporting requirements when defining the order. alfagomma.com

The 20 bar and 300 psi figures are the catalogue’s paired pressure designation. Mathematically, 20 bar is approximately 290 psi, so engineering calculations should use a consistent pressure basis rather than treating rounded catalogue units as exact conversions.

What the tube and cover each contribute

The inner tube contacts the conveyed medium. SBR/NR identifies a blend involving styrene-butadiene rubber and natural rubber, with conductive properties specified for this product.

The textile cords provide reinforcement for the intended pressure service. The outer SBR cover protects the assembly against specified environmental and mechanical exposures.

Abrasion resistance is valuable where hose may contact rough surfaces, but it does not make the cover immune to cuts, crushing or dragging damage. Ozone resistance similarly improves suitability for relevant exposure without removing the need for inspection and appropriate storage.

Fire resistance is a defined performance characteristic. It should not be described as fireproof construction.

Conductive construction needs a complete electrical arrangement

Conductive tube and cover materials can support static-control requirements. However, the behaviour of the installed assembly depends on more than the hose compound.

Connections, contact surfaces, equipment bonding and the site’s earthing arrangements may affect the complete installation. Where resistance or continuity testing is required, use the specified test method and acceptance criteria.

A wire restraint sock has a mechanical restraint function. Its presence does not automatically prove that electrical bonding requirements have been satisfied.

Conductive hose is also different from electrically insulating hose. It should not be selected for a task requiring electrical insulation simply because it has a robust mining cover.

Delivery service does not establish suction capability

The 240AA designation describes a delivery hose. A positive-pressure rating does not establish a vacuum rating.

If a customer needs suction service, chemical transfer, fuel delivery or another duty outside the stated application, that requirement should be reviewed separately.

Likewise, the 240AA specification does not establish the oil-mist resistance associated with other hose models. Confirm compressor oil carryover, lubricant exposure and media compatibility where they are relevant.

Selecting by the black cover or by a familiar pressure marking can overlook these distinctions.

Layer two — the coupling must match more than the diameter

Style S claw couplings provide a connection format for compatible industrial equipment. For this western NSW supply, the nominated size is 2 inches.

The exact coupling manufacturer, part number and instructions should identify the approved mating arrangement, working pressure, seal and locking requirements.

“Claw coupling” describes a broad category. Similar-looking products can differ in geometry, tolerances and service limitations.

A connection that engages is not necessarily a matched connection

Couplings should be selected as compatible mating components.

Do not rely on a quick visual comparison, apparent claw engagement or the fact that both parts are called 2-inch fittings. Confirm the coupling pattern and the manufacturer’s compatibility requirements.

This is particularly relevant where a contractor connects new hose assemblies to older site equipment. Existing fittings may be worn, unidentified or from a different product family.

A useful pre-order photograph shows the complete connection, its markings and the equipment interface. Measurements can assist identification, but should not replace a manufacturer-supported compatibility decision.

Three items to check at the joint

Sealing: The seal must be suitable for the fluid, temperature and coupling. A damaged, contaminated or incorrect seal can compromise the joint even when the metal parts appear sound.

Engagement: Coupling faces and claws need to be clean, undamaged and correctly engaged. Do not force a connection that is obstructed or mismatched.

Locking: Fit the specified locking pin, clip or other securing device where required by the exact coupling design and instructions.

A wire sock does not replace the coupling’s locking device. The locking feature helps secure the intended connection; the restraint addresses a different failure scenario.

The hose’s pressure marking is not the assembly rating

The 240AA hose is specified at 20 bar. The finished assembly must also account for the couplings, clamps, seals, adapters and operating conditions.

If any component has a lower applicable limit, that limit can govern the assembly. Temperature, pressure fluctuations, vibration and installation loads may introduce further restrictions.

Do not publish or use a 20 bar assembly rating solely because “20 bar” appears on the hose.

The same principle applies when replacing a fitting in service: a visually similar replacement does not preserve the original assembly specification unless its suitability is established.

Layer three — the clamp must retain the hose on the fitting

Four-bolt claw clamps are included in this package to provide the nominated hose-to-fitting retention arrangement.

Their role is mechanical. They must work with the selected hose construction and outside diameter, coupling tail and any specified retention features.

The correct clamp is not simply whichever four-bolt model closes around the hose.

Clamp selection starts with the assembled dimensions

Two hoses with the same internal diameter may have different wall thicknesses and outside diameters.

That difference affects clamp selection. Confirm the actual hose outside diameter and the clamp’s permitted range, along with compatibility with the fitting tail.

The hose tail’s dimensions and surface features also matter. A clamp cannot compensate for an unsuitable tail or an incomplete insertion.

Where the clamp design engages a fitting shoulder or other feature, that engagement must be correctly established. Use the specified assembly procedure rather than assuming all claw-clamp systems operate identically.

Torque is a product instruction, not a rule of thumb

Bolt tightening needs to follow the procedure for the particular clamp and assembly.

Different clamp models can require different torque values, tightening sequences and follow-up checks. Published torque for one clamp should not be transferred to another because the bolt count is the same. Manufacturer clamp tables illustrate these model-specific differences. australia.dixonvalve.com

Uneven tightening can produce an uneven grip. Excessive tightening can damage the hose or hardware. Insufficient tightening can leave inadequate retention.

Use suitable tools, identified components and the manufacturer’s instructions. Any retensioning should occur only after isolation and verification of a safe condition.

Keep the termination away from avoidable loads

The connection should not carry excessive hose weight, sharp bending or constant pulling.

Provide sufficient straight hose near the termination and respect the minimum bend radius for the exact product. Route and support the assembly so movement does not concentrate at the coupling tail.

On a drilling spread, vibration and repeated repositioning can affect connections over time. Review the layout where a clamp repeatedly loosens or a termination shows recurring damage.

Replacing the same hardware without addressing the loading may reproduce the same fault.

Layer four — the restraint needs a credible load path

Wire restraint hose socks are a secondary control for a failure scenario in which a pressurised hose or connection separates.

A woven stocking grips a length of hose and transfers restraint loads through its eyes, attachment hardware and anchorage arrangement.

The complete load path matters. A well-selected sock attached to an unsuitable anchor does not establish an effective restraint system.

Select the sock by the actual assembly

Hose sock selection should account for:

  • Actual hose outside diameter.
  • Hose construction and surface condition.
  • Working pressure and compressed-air service.
  • Assembly configuration and length.
  • Required grip length and installation space.
  • Restraint model, end arrangement and rated application.
  • Connection hardware and anchor suitability.
  • Manufacturer inspection and replacement requirements.

The nominal 2-inch bore alone is insufficient for selecting a stocking that grips the outside of the hose.

Do not assume a lifting or cable-pulling sock is a hose-whip restraint. Similar appearance does not establish suitability for the expected dynamic event.

Anchors are part of the specification

For a hose-to-equipment connection, identify where the restraint can attach and how that structure will withstand the relevant loads.

For a hose-to-hose connection, use a documented restraint configuration intended for that arrangement. The connection layout and potential movement need to be considered together.

Do not attach a restraint to a guard, handle, small pipe or convenient nearby component without confirming that it is suitable.

Follow the restraint manufacturer’s instructions for attachment hardware, grip position, slack and geometry. There is no universal installation dimension that applies to every sock and layout. Manufacturer guidance specifically addresses outside-diameter selection, pressure, inspection and suitable anchorage. Dixon

Understand what a sock can and cannot do

A correctly selected and installed restraint can help limit uncontrolled movement following a connection failure.

It does not stop the initial failure, contain the escaping air, guarantee that no component will move, or make it acceptable to stand in a potential failure path.

It also does not justify using a damaged hose or an insecure fitting.

The strongest approach combines suitable pressure containment, compatible connections, sound termination, appropriate restraint, controlled access and effective isolation.

Compare three commonly confused controls

ControlPrimary roleDoes not replace
Coupling locking deviceHelps secure the engaged coupling as designedHose-tail retention or a specified restraint
Four-bolt claw clampRetains the hose on the fitting in an approved assemblyCoupling locking or secondary restraint
Wire restraint hose sockHelps limit movement after separationA serviceable hose, sound termination or rated anchorage

A generic looped whip-check cable and a woven restraint sock should also not be treated as automatically equivalent. Select the actual device against the documented application.

Fox Global can help with enquiries covering hose, couplings, clamps and restraint requirements together. Call 1300 852 795 or email sales@foxglobal.com.au with the site arrangement and required duty.

Put the pressure numbers into context

Compressed air stores energy. A connection failure can release that energy through escaping air and rapid movement.

This makes air service materially different from evaluating a hose by its appearance or checking whether a fitting feels secure by hand.

A simple force example

For an illustrative closed-end calculation, a 51 mm bore has a cross-sectional area of approximately 0.00204 square metres.

At 20 bar gauge pressure, pressure multiplied by that area gives a static force of approximately 4.1 kN.

This is not a restraint design load. It does not account for release dynamics, hose movement, flow effects, geometry or the behaviour of a failed connection.

Its purpose is to show why large-bore compressed-air equipment deserves engineered component selection. It must not be used to choose an anchor or restraint without the relevant design information.

The 4:1 safety factor is not spare working capacity

The supplied specification gives a 4:1 safety factor for sizes up to and including 63 mm. The 2-inch hose falls within that range.

That ratio relates to the hose’s specified working and minimum burst performance under defined conditions. It is not permission to operate at four times working pressure.

Burst pressure is not a commissioning pressure, a routine test pressure or an assembly pressure rating.

For other diameters, consult the current manufacturer table. The supplied specification identifies a different factor for the larger size range, so one ratio should not be applied across the entire product family.

Temperature limits need an assembly review

The hose’s stated temperature range is -30°C to +80°C.

Confirm the permitted pressure-temperature conditions and the ratings of seals and fittings as well. Maximum temperature and maximum pressure should not automatically be assumed to apply simultaneously without supporting documentation.

Consider the temperature of the conveyed air and contact with hot equipment, not only the weather forecast. Direct exposure to unsuitable heat sources can damage an otherwise correctly selected hose.

Air delivery performance: pressure at the compressor is only the beginning

A drilling contractor needs the required pressure and flow at the equipment, not merely at the compressor outlet.

Hose length, bore, restrictions, couplings, valves and simultaneous demand all influence delivery performance.

A larger compressor does not automatically resolve a restrictive distribution layout.

Use comparable flow information

Compressed-air specifications may describe free air delivery, standard volumetric flow or actual compressed volume.

Those quantities are not interchangeable. Confirm the reference conditions before comparing demand, compressor output and hose capacity.

Pressure-drop calculations also need the operating pressure, temperature, route length and effective bore. Avoid assigning a universal air-flow capacity to every 2-inch hose assembly.

Investigate restrictions before increasing the set pressure

A partly closed valve, undersized adapter, damaged liner or unnecessarily long line can contribute to poor delivery.

Identify the cause of pressure loss rather than raising the compressor setting beyond the limits of downstream equipment.

For a representative western NSW drilling setup, a pressure reading upstream and another at the consuming equipment can help identify a distribution problem. Measurements should be taken through a controlled procedure with suitable instruments.

This is an application example, not a reported performance result from the supplied order.

Manage air quality as well as pressure

Condensate, contamination and lubricant carryover can affect equipment and hose suitability.

Specify the actual air conditions and confirm any treatment, drainage and compatibility requirements. The 240AA construction should not be used to infer breathing-air approval.

This industrial mining hose is not being presented as a breathing-air hose, an oxygen hose or an electrically insulating line.

A field inspection should answer clear questions

A useful inspection is more than checking that the hose is still attached.

It should establish whether the assembly remains identified, intact, correctly connected, adequately retained and appropriately restrained.

AreaLook forResponse to a concern
Hose bodyCuts, blisters, exposed reinforcement, cracking or crushingRemove from service for assessment
CouplingWorn claws, damage, contamination or poor engagementIsolate and inspect the mating components
SealDamage, deterioration or leakageReplace with the specified compatible part
ClampDamage, corrosion, uneven seating or fitting movementAssess the complete termination
Restraint sockBroken wires, corrosion, distortion or loss of gripReplace or assess under manufacturer instructions
Anchor and hardwareDamage, movement or uncertain suitabilityStop use until the arrangement is verified
IdentificationMissing model, rating or assembly recordsResolve identity before reissue

Keep inspections proportionate to operating severity and manufacturer instructions. Harsh routing, frequent relocation and vibration may justify closer attention than a protected fixed installation.

Treat recurring symptoms as system information

SymptomPossible issueWhat to investigate
Air leakage at the couplingSeal damage, wear or incomplete engagementCompatibility and condition of both halves
Hose moving on the tailRetention or assembly problemClamp selection, installation and hose condition
Repeated bolt looseningVibration, incorrect installation or loadingAssembly procedure and mechanical layout
Damage near the fittingTight bending, unsupported weight or abrasionRouting, support and termination geometry
Sock damageWear, unsuitable installation or a previous load eventFull restraint system and replacement criteria
Low tool performanceDistribution loss, demand or equipment conditionPressure, flow basis, restrictions and air quality

These are investigation prompts, not permission to continue operating with a suspected defect.

Isolation must address trapped air

Before disconnection, retensioning or repair, stop the relevant equipment, isolate the supply, prevent unintended restart and release stored pressure through the approved method.

Check for air trapped behind valves, within connected equipment or in isolated hose sections. A stopped compressor or one zero-reading gauge does not prove every part of the system is depressurised.

Never loosen a coupling or clamp to use it as an improvised bleed point.

If a hose separates or begins whipping, do not approach or attempt to catch it. Activate the appropriate remote isolation or emergency response from a safe position.

What a complete purchase request should contain

A well-defined enquiry gives procurement, maintenance and the supplier the same understanding of the required assembly.

For this product family, include:

  1. Alfagomma 240AA hose identification, required size, lengths and quantities.
  2. Conveyed medium, pressure range, maximum credible pressure and temperature.
  3. Compressor and drilling-equipment connection details.
  4. Exact Style S coupling requirements and existing mating components.
  5. Required clamp arrangement and termination instructions.
  6. Hose restraint configuration, available anchors and site criteria.
  7. FRAS documentation, electrical requirements and any testing expectations.
  8. Identification, delivery destination and required date.

Fox Global’s role is to listen, clarify gaps and work towards a suitable supply package. Photographs, drawings and existing part numbers can make that process faster.

Agree documentation and testing before manufacture or dispatch. Do not invent a generic proof-test multiplier or substitute compressed-air testing for an approved procedure.

Record the final assembly specification so a later replacement can be ordered accurately.

Plan spares around identified failure points

For a remote contractor, a useful spare-parts list follows the actual assembly rather than a generic box of air fittings.

Identify compatible seals, locking devices and replacement hose assemblies. Keep unserviceable couplings and damaged restraint socks out of the same storage area as ready-to-use equipment.

When an assembly is removed, record the reason and location. Repeated abrasion at the same support or recurring damage beside a drilling unit can reveal a routing problem that would otherwise follow every replacement.

Store hose away from damaging heat, sharp loads and unsuitable chemicals. Protect coupling faces from contamination and avoid tight coils that distort the hose.

The aim is a replacement that arrives with the correct identity and supporting information, ready for installation under the site procedure.

Frequently asked questions from procurement and maintenance

Which hose model is specified for this supply?

The hose specified for this supply is Alfagomma 240AA FRAS air and water delivery hose. Its materials, application and size-dependent safety factor should be taken from the 240AA documentation.

Does FRAS mean fireproof?

No. FRAS means Fire Resistant Anti-Static. It describes specified performance characteristics, not immunity to fire or automatic acceptance in every installation.

Does exceeding AS 2660/B approve the complete assembly?

The manufacturer statement relates to the hose product. The completed assembly and site installation still need their own component, service and acceptance checks.

Is the complete hose assembly rated to 20 bar?

That must be established from the selected hose, couplings, clamps, seals and conditions. The hose rating alone cannot establish it.

Can the hose carry water or stone dust?

Those duties appear in the stated product application. Confirm the actual medium, equipment, flow conditions and complete assembly suitability before assigning the duty.

Can wire socks replace coupling locking pins?

No. They serve different functions. Use the coupling’s specified locking arrangement and the required restraint system.

Can the clamp torque be provided from the hose size?

Not reliably. The exact clamp model, hose outside diameter, fitting and assembly instructions determine the requirements.

Can Fox Global supply matching replacements nationally?

Yes. Fox Global supports enquiries and supply across Sydney, Melbourne, Brisbane, Perth, Adelaide and regional Australia. Provide assembly identification and confirm availability, documentation and freight timing.

From a western NSW drilling package to a national supply requirement

Fox Global is proudly Australian-owned and family-operated, supporting customers who need practical answers about industrial hose, valves, fittings and assembled systems.

The western NSW package illustrates an approach based on the complete application: Alfagomma 240AA hose, Style S claw couplings, four-bolt claw clamps and wire restraint hose socks, considered together.

Responsive communication matters when equipment is needed for a mobilisation, maintenance shutdown or replacement programme. Fox Global aims to respond quickly, clarify technical requirements and communicate realistic supply arrangements.

Its experience spans mining, civil construction, food and beverage, chemical processing, water treatment, manufacturing, agriculture, oil and gas, marine and waste management.

That breadth does not mean one mining hose suits every industry. Hygienic food transfer, aggressive chemicals, marine exposure and high-pressure oilfield service require their own product selection.

It means customers can explain the operating problem and discuss a tailored hose and fitting solution with a team familiar with varied industrial requirements.

A Sydney contractor may need a replacement assembly. A Melbourne manufacturer may need compatible plant connections. Brisbane, Perth and Adelaide customers may need a coordinated package delivered to a regional project.

Send Fox Global your hose duty, connection details, restraint requirements and delivery deadline. Call 1300 852 795 or email sales@foxglobal.com.au to define a supply package around the equipment, the people and the site where it will work.

Search News

Follow

Recent Posts

Request a Quote

With Fox Global, you can pick up the phone and chat with an industry expert for a customised end-to-end solution.

5.0 rating on Google

product Guide

Download now