Flanged Bronze Gate Valves for Sydney Pet Food Production Facility.
2″ (50mm) Flanged Bronze Globe Valves drilled to Table E heading out for installation on a steam line at a pet food production facility on the outskirts of Sydney.
Steam Service Globe Valve Service and Rebuild for Food & Beverage Production Facility in Sydney
A local food production facility was having dramas with a 40 year old Promet Globe Valve. After a complete overhaul, re-seat, sand blast, paint & testing this valve is ready to be put back into action once again.
2inch (50mm) Flanged PN40 Bellow Seated Globe Valves Australia
2″ (50mm) Flanged Bronze Globe Valves drilled to Table E heading out for installation on a steam line at a pet food production facility on the outskirts of Sydney.
Flanged Bronze Globe Valves for Sydney Pet Food Production Steam Line.
2″ (50mm) Flanged Bronze Globe Valves drilled to Table E heading out for installation on a steam line at a pet food production facility on the outskirts of Sydney.
Bronze Globe Valves for Steam Lines in Central NSW grain production facility.
1″ (25mm) & 2″ (50mm) Bronze Globe Valves heading out for installation at a grain production facility in Orange NSW.
Bronze & Brass Valves for Steam Applications – Sydney, Brisbane, Melbourne.
Steam Valve Solutions – Sydney, Brisbane, Melbourne.
Ball Valves, Check Valves, Globe Valves Pressure Reducing Valves (PRV’s) & steam Traps we have you covered.
Service You Can Trust
A bunch of valves supplied for a steam line replacement in a food manufacturing plant in Sydney. With the plant operating 24 hours a day it was critical the new valves were supplied in time for the night shift team to begin the work.
Cast Steel Flanged Bellow Seated Globe Valves Australia
Globe valves are primarily found in fluid regulation applications. Their (semi-) spherical form is comprised of two body halves, separated by an internal baffle. Shutting the globe valve is achieved by means of a disk, which screws into the seat of the battle by means of a handwheel or actuation. As opposed to ball valves, the flow of the medium is not direct and in one direction, instead the fluid enters and rises inside of the body of the valve prior to exiting on the other side.
